Dead head(lites)

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yupperdoo

Active member
Joined
Jun 19, 2012
Messages
27
Reaction score
0
Location
Wisconsin USA
Working on"refreshing my 76 GW,PO adv headlite only worked on low beam,either stock one or Vetter. One removing the vetter found Satans ratsnest of wiring in shell.Apparently PO never heard of connectors.proper splicing,electrical tape etc.Managed to remove the havoc but now have NO headlamp power on either(blue/white)leads.Thought it might be the reserve unit,so did the auth emergency bypass with no improvement.Tail/brake light working fine,signals/injstrument lights working fine.Only thing I'm lacking is headlite power.The ODD thing is I have NO power at headlamp fuse(good fuse).
:headscratch:
 
Did you check the connector to the fuse box at the harness? Might need to clean and tighten connectors.
 
Thank,whodathunkit? Guess when I put the new throttle cables on I pinched the wires&broke the starter switch.
Tests show thats the problem...Thanx again!
 
Top