My 79 GL1000 has no 4 way flashers, seems it never did. It has signal lights, but I want to put in flashers. The traffic in Corpus Christi is nuts, need to be safe! What is the best way to do this, I think a flash unit and switch, but not sure how to make it work.
Hazard Lights
- Thread starter PeterDas
- Start date
Help Support Classic Goldwings:
slabghost
Well-known member
Could probably put a switched jumper between left and right signal wires. switch on and either signal position all should flash.
That might work well, simple idea. I was way over-thinking it with flasher and diodes possibly. Always miss the simple stuff..... Thank you
- Joined
- Dec 3, 2009
- Messages
- 10,965
- Reaction score
- 229
- Location
- Kingsport, Tennessee
- My Bike Models
- Former '82 GL1100 "The Slug"
Mike Nixon's website has a "how to for 4 way flashers"....
https://www.motorcycleproject.com/motorc ... ashers.swf
https://www.motorcycleproject.com/motorc ... ashers.swf
[url=https://www.classicgoldwings.com/forum/viewtopic.php?p=133364#p133364:2u6hfifd said:
Thank you. Will take a look.
slabghost
Well-known member
Wow is he a talker or what!?
- Joined
- Dec 3, 2009
- Messages
- 22,403
- Reaction score
- 238
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
Yeah just jump to page 7 :lazy:[url=https://classicgoldwings.com/forum/viewtopic.php?p=133368#p133368:2gofkn2o said:
Seems simple to me. Wire from fuse block to switch, to three pole flasher unit one side out to front and rear left. The other out to front & rear right. The front may require a wire tap in but the rear should have vacant spot on connector
