I have the common problem with the shifter seal leaking.What will have to be removed to get to the seal.Taht is besides the crash bar I guess and the shift arm.I hope not the exhaust.How do you pull the old seal out. :Awe:
Shifter Seal
- Thread starter zcarron
- Start date
Help Support Classic Goldwings:
mike in idaho
Well-known member
Jab an ice pick into it, between the shifter shaft and the engine case, then pry it out. Tap the new one with a hammer and a deep socket or a length of small diameter PVC pipe.
- Joined
- Dec 3, 2009
- Messages
- 22,403
- Reaction score
- 239
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
Can also run a drywall screw into it then pull out.
...and you can buy a seal for any year GoldWing, it has never changed.
~O~
~O~
- Joined
- Dec 6, 2009
- Messages
- 1,788
- Reaction score
- 43
- Location
- On a mountain in the Ozarks
- My Bike Models
- 1982 Standard
Here is the part number.
