Trying to find the right clutch hub tool.

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chilidawg

Well-known member
Supporting Member
Joined
Oct 8, 2011
Messages
690
Reaction score
8
Location
Spring Texas
Well, the motion-pro tool won't work (24mm) so neither will the other one easily available, the 20 x 24mm. Turns out this 4 lug wrench is 26mm and is not available

So I will pay a good paypal deposit and/or rental fee, or buy it, to get my clutch off damage free.

I know some of you guys have built your own so that's what I'm aiming for, one that really works.
 
You can borrow mine - it's the Honda 26x30 socket. All I ask is that you restore my faith in humankind and return it! PM me with your address and I'll put it in the mail. I'm sure I can trust a fellow forum member, GoldWinger, and Texan! (I'm from El Paso)
 
[url=https://forum.classicgoldwings.com/viewtopic.php?p=99142#p99142:jwi7o2u7 said:
Steve83 » Tue Oct 08, 2013 11:52 pm[/url]":jwi7o2u7]
You can borrow mine - it's the Honda 26x30 socket. All I ask is that you restore my faith in humankind and return it! PM me with your address and I'll put it in the mail. I'm sure I can trust a fellow forum member, GoldWinger, and Texan! (I'm from El Paso)

Thank you again Steve83. PM sent.
 
[url=https://www.classicgoldwings.com/forum/viewtopic.php?p=99216#p99216:2nfvah9o said:
toytender01 » Wed Oct 09, 2013 12:01 pm[/url]":2nfvah9o]
Steve I spent 3yrs 3mons 3days in El Paso in 60s :Awe: :Awe:
I hope it wasn't TOO miserable for ya! Actually, in the 60's and 70's El Paso was a pretty decent place to live. Now, it might as well be part of Mexico.
 
Top