PTATSOC
Active member
- Joined
- Apr 13, 2010
- Messages
- 43
- Reaction score
- 9
- Location
- North Dallas Metroplex
- My Bike Models
- Burgundy 1980,1,2,3 Goldwing and a Black 1981 Goldwing
Need some help removing a clutch basket, the inner most nut, not the nut to remove the plates, the one behind that with the 40mm cir-clip behind it. Where can I purchase the special tool or what size socket can I cut up to fit to remove the nut. I have an 83 motor with 110K on it and replaced the friction plates at 95k and the basket was badly worn, smoothed the rough areas best as possible at the time. I have acquired an 81 engine with 25k on it (suffered sudden stop syndrome) and the clutch basket looks like new. What is the best way to pull the basket. Once I get the salvage one out I will drop the engine out of the daily driver and swap clutch baskets and install a C5 ignition, and do some other maintenance while the engine is out.