Fork dust covers on a Wing?

Has anyone put bellows-type dust covers on their forks? Are they made for oldwings or has anyone found a size that fits?

I have seen pictures of some. As to the size I have no idea. Maybe search for fork size comparison between your wing and a dirt bike?

If you google gl1100 fork gaiters you will find some answers, here is one..seems 750 Honda ones will work according to this thread.
https://www.goldwingfacts.com/forums/2-g ... iters.html

id like to have some on hooch here in this sandy fla surrounding

[url=https://classicgoldwings.com/forum/viewtopic.php?p=175925#p175925:2o67hsa9 said:

zman » Wed Jun 29, 2016 5:59 am[/url]":2o67hsa9]
If you google gl1100 fork gaiters you will find some answers, here is one..seems 750 Honda ones will work according to this thread.
https://www.goldwingfacts.com/forums/2-g ... iters.html

Click to expand...

I thought CB750K fork tubes had smaller diameter than Oldwing.
It's a popular CB750K mod to install Oldwing forks.

Maybe the rubber just stretch?
In that case they may tear fairly soon.

Modern dirt bikes with thick fork tubes should be the best bet but black may be rare color (unless you like yellow, red and stuff.)

Thanks for the tip. Lots of them on ebay for $20-30. When I get around to rebuilding the forks I'm adding them.

https://www.ebay.com/sch/items/?_nk...12&_fpos=&_fspt=1&_sadis=&LH_CAds=&rmvSB=true

Just measured fork tube OD.

CB750K5 ('75) 35mm
GL1100A ('82) 39mm

works on 1000s forks

[url=https://classicgoldwings.com/forum/viewtopic.php?p=175964#p175964:7lkulxvl said:

skiri251 » Wed Jun 29, 2016 6:51 pm[/url]":7lkulxvl]
Just measured fork tube OD.

CB750K5 ('75) 35mm
GL1100A ('82) 39mm

Click to expand...

Where do you measure? Isn't there a top and bottom number?

This guy in England has them
https://www.gaiterman.co.uk/honda-gl1100-gaiters---fork-boots-57-p.asp

[url=https://classicgoldwings.com/forum/viewtopic.php?p=175968#p175968:2txe1mh5 said:

chuck c » Wed Jun 29, 2016 4:33 pm[/url]":2txe1mh5]

[url=https://classicgoldwings.com/forum/viewtopic.php?p=175964#p175964:2txe1mh5 said:

skiri251 » Wed Jun 29, 2016 6:51 pm[/url]":2txe1mh5]
Just measured fork tube OD.

CB750K5 ('75) 35mm
GL1100A ('82) 39mm

Click to expand...

Where do you measure? Isn't there a top and bottom number?

Click to expand...

I only measured inner tube OD.
Yes, the boots go on to inner tube at one end and fork leg on the other.
It's difficult for me to measure Oldwing fork leg OD because mine has fork brace installed.
But generally speaking fork leg OD will be proportional to inner tube OD. So I think Oldwing got bigger fork leg OD than CB750K.

I hope that British fork boots work for you.

Mine has a fork brace too which means the gaiters would have to be cut to fit around it kind of spoiling the purpose.

After market brace may fit a bit lower allowing space for the gaitors.