Recent content by coachdeez

Bap geon**

Gap geon auto parts stores can order them through their empi/ (aftermarket old vw) catalog

running a rebuilt 32 dft carb. bike starts idles and runs great, no leaks. the gas tank is out right now but it seem to be smooth. very simple build.

everthing fits tight and flush on the left and the right aswell fits perfectly in the gap with almost no tweaking. a truely easy build

left

right

right

left

cut 2 of these in half, making 4 shorter connector. LF cyl use 2 straight pvc connectors and 2 short connectors. perss all pvc flush and clamp tight. LR cyl use 1st un cut 45 deg at plenum with 2 short connectors seal itake hole in head and install elbow 180 out for perfect holder for...

right side bolts up as is. The 1" pvc connector fits perfectly in to the factory elbow and is damn close id to the vw plenum and the factory elbows.

Qty 4 Qty 4 Qty 2 Qty 4 thats all folks right at $40 at your lacal home depot

So this is how i made my runners to adapt my vw plenum to my factory intake elbows. i plan on showing you in poorly looking pictures how i built it and how much it cost.

Few extra clamps

45°to 45° connection on cyl #3 use half rubber to connect. Fitting should be flush if cut correctly.

Spacer used if wanted