Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Gallery Index & Tech Ref
Goldwing Trivia
Goldwing- The First 20 Years
From Japan to USA
Goldwing Magazine Articles
Two Wheel Magazine 1975- Honda's GL1000, The Future
Cycle Illustrated, Nov. 1975- 2 Big Ones From Honda
1977 Model GL1000 Setup Instructions
Owners Manuals
GL1000
1975 GL1000
1978 GL1000
GL1100
1980 GL1100 Standard
1981 GL1100 Interstate
1982 GL1100 Aspencade
1982 GL1100 Interstate
1982 GL1100 Standard
1983 GL1100 Aspencade
1983 GL1100 Interstate
GL1200
1984 GL1200 Standard
1986 GL1200 Interstate
1987 GL1200 Aspencade
GL1500
1987 GL1200 Aspencade
Service Bulletins and Recalls- All Models
GL1000
GL1000- Important GL1000 Service Reminder (1 Page) 6-13-1975
SL #108 Tire and Wheel Rim Matching Information 6-20-75 (7 pages)
Service Tools Newsletter 7-31-75 (2 pages)
SB 1000 #3 Pressurised Cooling System Tester 10-10-75 (3 pages)
SB 1000 #1 Cylinder Head Core Plug Leakage- Revised 7-9-76 (3 pages)
SL #117 Exhaust Pipe and Muffler Paint Damage 9-30-76 (1 page)
SL #118 Instrument Troubleshooting 10-27-76 (5 pages)
PB 1000-2 Changes to Clutch Components 11-3-76 (1 page)
PB 1000-3 Changes to Right Front Engine Cover 1-5-77 (1 page)
SB 1000 #11 Final Drive Gear Case Cover Change 10-15-77 (1 page)
SB 1000 #12 New Main Bearing Caps 11-23-77 (1 page)
SB 1000 #13 Recall to Replace Rear Brake Pads 3-21-78 (5 pages)
SB 1000 #14 Cylinder Head Bolt Torque Change 11-8-78 (1 page)
GL1200
Special Consumer Report: 1984 and 1985 GW Rear Hub
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Classic Goldwing Technical Forums
GL1200
'85 LTD Engine Missing and Stopping
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Classic Goldwings:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Rednaxs60" data-source="post: 201740" data-attributes="member: 4617"><p>Was out on the bike this morning at 0530 and 0 deg C - heated liner on and working well. Bike is operating very well. The little stumble I used to get when accelerating on an on ramp or when I was accelerating in the lower gears is gone now. Very aware of how it has been running.</p><p></p><p>Got to thinking about my engine issues last June/July where I spent quite a few hours trying to fix the misfire/stumble issue up to 3000 RPM. My final solution back then was to reinstall the original coils and wires in place of the new coils and wires that I had installed. My thread on this issue is: <a href="https://www.classicgoldwings.com/forum/viewtopic.php?f=24&t=12233" target="_blank">viewtopic.php?f=24&t=12233</a> I mention above that I had a little stumble when accelerating, and this has been there since I went back to the original coils/wires. </p><p></p><p>Now that I have had this issue present itself, I'm now curious as to whether the real issue was a venting issue back then as well. I have taken the coils I bought and have done a coil check and the coils are extremely close to spec as per the OEM service manual. When I get the second bike out here I'm thinking I will install the new coils, wires and new plug boots as well to test my theory. </p><p></p><p>Time for a new thread on this issue.</p><p></p><p>Cheers</p></blockquote><p></p>
[QUOTE="Rednaxs60, post: 201740, member: 4617"] Was out on the bike this morning at 0530 and 0 deg C - heated liner on and working well. Bike is operating very well. The little stumble I used to get when accelerating on an on ramp or when I was accelerating in the lower gears is gone now. Very aware of how it has been running. Got to thinking about my engine issues last June/July where I spent quite a few hours trying to fix the misfire/stumble issue up to 3000 RPM. My final solution back then was to reinstall the original coils and wires in place of the new coils and wires that I had installed. My thread on this issue is: [url=https://www.classicgoldwings.com/forum/viewtopic.php?f=24&t=12233]viewtopic.php?f=24&t=12233[/url] I mention above that I had a little stumble when accelerating, and this has been there since I went back to the original coils/wires. Now that I have had this issue present itself, I'm now curious as to whether the real issue was a venting issue back then as well. I have taken the coils I bought and have done a coil check and the coils are extremely close to spec as per the OEM service manual. When I get the second bike out here I'm thinking I will install the new coils, wires and new plug boots as well to test my theory. Time for a new thread on this issue. Cheers [/QUOTE]
Insert quotes…
Verification
Post reply
Classic Goldwing Technical Forums
GL1200
'85 LTD Engine Missing and Stopping
Top