JoeBarTeam
Well-known member
hi Oldwing-owners
first of all i 've to tell that i've read all the threads i founded about the solenoid starter + alternator + regulator just because my troubles began with no battery charge in my gl1200a from 86. the regulator was out of order. i changed it. still no charge. a bad contact at the starter solenoid, solved. i also changed the bone fuse like recomended and cleaned all contacts on the way up and down. charging is ok. finished to put plastics back and wanted to make a test ride. the bikes doesn't start. all instrument lamps ok. engine stop on ON. neutral ok. well, take plastics away and look further. the starter solenoid clicks when i test it out of the bike with a battery but not in the bike. all wires going to the solenoid work right. the red/green wire lights the test light attached to the wire and + of the batterie in neutral, this is ok. The yellow/red wire shows only 1.3mV pushing the start button. is it right or should i get more volts doing it (something like 12 volts)? i think the issue starts here but how to solve?
thank you for your help.
Joebarteam
Gesendet von meinem SM-J320FN mit Tapatalk
first of all i 've to tell that i've read all the threads i founded about the solenoid starter + alternator + regulator just because my troubles began with no battery charge in my gl1200a from 86. the regulator was out of order. i changed it. still no charge. a bad contact at the starter solenoid, solved. i also changed the bone fuse like recomended and cleaned all contacts on the way up and down. charging is ok. finished to put plastics back and wanted to make a test ride. the bikes doesn't start. all instrument lamps ok. engine stop on ON. neutral ok. well, take plastics away and look further. the starter solenoid clicks when i test it out of the bike with a battery but not in the bike. all wires going to the solenoid work right. the red/green wire lights the test light attached to the wire and + of the batterie in neutral, this is ok. The yellow/red wire shows only 1.3mV pushing the start button. is it right or should i get more volts doing it (something like 12 volts)? i think the issue starts here but how to solve?
thank you for your help.
Joebarteam
Gesendet von meinem SM-J320FN mit Tapatalk