CB Dinn plug pinnout on my GL1200 1984 ??

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gervais

Active member
Joined
Nov 14, 2017
Messages
40
Reaction score
0
Location
Riviere-Bleue,Quebec
Hi all
well i am looking for the pinnout of the Dinn plug where the driver would connect his helmet ?

i am working on building,manufacturing my own cable too connect for my OEM CB that is fixed on my 1984,,
maybe some one have the pinnout for the connection.

I know she's old but i tried to find a used mike/speaker kit and no chance so i building my own.

thanks for your help
Gervais.
 
This is all I could find...
 

Attachments

  • 9-24.jpg
    9-24.jpg
    176.6 KB · Views: 99
[url=https://classicgoldwings.com/forum/viewtopic.php?p=198429#p198429:203j0m9x said:
Dadster » Today, 10:59 am[/url]":203j0m9x]
This is all I could find...
file.php


well thanks bill,
you know the dinn plug,
i need to know what ipn are the speakers and which one is the mike but maybe this document does not exist ,,
possible when you consider the age of the bike
anyway thanks for the files

gervais
 
Here ya go... If you don't know what pin is number 1 then you might have to peel back the rubber outer housing to see which wires go to which pin

PIN/FUNCTION - - - GL1200 - - - - - - - - - - - - - GL1500
1-mic input: - - - - yellow wire - - - - - - - - - - - white wire
2-mic grnd: - - - - yellow wire grnd shield - - - - - dull black wire
3-headset grnd: - -white & red wire grnd shields - -glossy black wire
4-headset right: - - red wire - - - - - - - - - - - - yellow wire
5-headset left: - - -white wire - - - - - - - - - - - red wire
 
[url=https://classicgoldwings.com/forum/viewtopic.php?p=198435#p198435:2dehv3o3 said:
Dadster » Today, 2:04 pm[/url]":2dehv3o3]
Here ya go... If you don't know what pin is number 1 then you might have to peel back the rubber outer housing to see which wires go to which pin

PIN/FUNCTION - - - GL1200 - - - - - - - - - - - - - GL1500
1-mic input: - - - - yellow wire - - - - - - - - - - - white wire
2-mic grnd: - - - - yellow wire grnd shield - - - - - dull black wire
3-headset grnd: - -white & red wire grnd shields - -glossy black wire
4-headset right: - - red wire - - - - - - - - - - - - yellow wire
5-headset left: - - -white wire - - - - - - - - - - - red wire


super Bill
thanks
i will built my own cable,i still have around OLD Keyboard of the 80's that were using din plug AND the have cable on each pinn so i will be able to do something

thanks and best christmas to come.
Gervais
 
Top