Torque Specs

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AApple

Well-known member
Staff member
Administrator
Moderator
Supporting Member
Joined
Dec 3, 2009
Messages
9,225
Reaction score
257
Location
Duncanville, Texas
My Bike Models
1981 GL1100 Innerstate("The Turd")SOLD!!, 1996 GL1500 Innerstate
Engine: (First figure(s) for ft.-lb., second figure(s) for mkg)
Oil Drain Plug: 25-29..... 3-4
Oil Filter Bolt: 20-24..... 2.7-3.3

Cylinder Head Bolts:
6mm bolts: 7-10..... 1.0-1.4
10mm bolts: 37-40..... 5.3-5.7

Clutch Bolts:
1975-1979: 7-10..... 1.0-1.4
1980 on: 7..... 1.0

Brakes:
Brake disc to hub nuts: 20-24..... 2.7-3.3
Front Caliper Mounting Bolts:
1975-1979: 22-29..... 3-4
1980-1981: 13..... 1.8
1982: 14-18..... 2.0-2.5
1983:
Upper: 29..... 4.0
Lower: 17..... 2.3
Rear Caliper Mounting Bolts:
1975-1979: 40-43..... 5.5-6.0
1980-1981: 13..... 1.8
1982 on: 14-18..... 2.0-2.5

Caliper Pivot Bolts
Front
1982: 19-22..... 2.5-3.0
1983: 20..... 2.8
Rear:(1982 on) 18-22..... 2.5-3.0

Suspension and Final Drive:
Front Axle Mounting Nuts:
1975-1979: 13-18..... 1.8-2.5
1980 on: 25..... 3.5

Fork Upper Pinch Bolts:
1975-1979: 22-29..... 3.0-4.0
1980 on: 16..... 2.2

Rear Axle Nut & bolt: 58-72..... 8-10
Rear Shock Absorber Nut & Bolt 22-29..... 3.0-4.0
Final Drive Mounting Nuts: 25-33..... 3.5-4.5
 
Top