petesgoldwing
Active member
Just want to say hello to all of you. I'm realy new at this. :wave:
I'm a new person just starting
- Thread starter petesgoldwing
- Start date
Help Support Classic Goldwings:
hello pete, welcome to CGW
slabghost
Well-known member
Welcome to CGW Pete. Jump right in. You won't learn any younger ya know.
- Joined
- Dec 3, 2009
- Messages
- 9,232
- Reaction score
- 262
- Location
- Duncanville, Texas
- My Bike Models
- 1981 GL1100 Innerstate("The Turd")SOLD!!, 1996 GL1500 Innerstate
Welcome to the CGW Forums, petesgoldwing!!! :clapping: :clapping: :clapping:
We all started not knowing what we were doing, too, so just jump right on in.... :wave:
We all started not knowing what we were doing, too, so just jump right on in.... :wave:
- Joined
- Dec 3, 2009
- Messages
- 10,967
- Reaction score
- 230
- Location
- Kingsport, Tennessee
- My Bike Models
- Former '82 GL1100 "The Slug"
Welcome to the site from New Jersey! :clapping:
Yo! We all had to start sometime! Glad to have ya..
Welcome to the Forum, this is a great place to start.
Welcome Pete.
Hello Pete,
Anything vintage goldwing and you're in the right place. Ask away.
Anything vintage goldwing and you're in the right place. Ask away.
Welcome to the forums Pete, and just for the record "we all were new at this at one time." :good:
~O~
~O~
Ask away pete, there are no stupid questions here.
All are here to help. :wave: :wave:
All are here to help. :wave: :wave:
welcome pete, from central Calif.
welcome to CGW ...this is a great site ...with lots of help .....
Winger 82
Well-known member
Welcome from N.Western,Pa. :hi:
carl62cycles
Well-known member
Welcome from So Cal Pete feel free to roam around :hi:
danf
Well-known member
Welcome Pete, hope ya like the site...
eagle eye
Member
Me to. I have 2 Hondas gl1200a and vf700f. I am looking for some info on the rain drain hole size that's in the heads as mine are plugged. Any one know by chance? Yes I still have snow in the yard but I am trying to think warm thoughts.
Howdy from Euless, welcome to the forum
The hole appears to be about 1/8", don't have a method to measure with & plugs in the way to try different drill bits for size.
Someone here probably has the exact size
The hole appears to be about 1/8", don't have a method to measure with & plugs in the way to try different drill bits for size.
Someone here probably has the exact size
What ever happened to Pete, so many people join then leave..Do we smell or something?
eagle eye
Member
Ok thank you I will try that
