83GL1100. When I start the bike using the choke it runs very rough for a few seconds and then idles up to about 3000 rpms. I start to ease off on the choke and it will slow down and go dead if I do not give it more choke.Eventualy as it warms up I can get it to idle at a very low rpm around 600 to 700 rpms. It seems like I am not getting fire on all cylinders.I checked the plugs and they look good. Maybe the #2 cyl. looks a little wet. I am wondering if I could have a bad coil on # 1&2. When I pulled the plug on 2 and checked the fire It looked like it was firing. What else could I check before pulling the carbs. :Awe: