Relay fuse panel feed Mod

[OldWrench]

The primary power wire coming from the 30 amp fuse ends at the relay, I then ran a 18 ga red wire to the key switch. When the key switch is turned on the black wire runs back to the relay to close the relay. I'll see if I took any pictures of that.
The black wire running to the distribution panel brings the primary power to the panel. I suppose I could have used red to the panel but it is the black wire that supplies power to the stock fuse panel. Let me see if I can get you a better picture of the schematic

 

[OldWrench]

Maybe if I email you the schematic it will be a little easier to follow, because when I printed it out my old eyes could read it.

 

[mcgovern61]

OldWrench » Mon Jul 18, 2016 6:40 pm[/url]":txrtl79d]
Maybe if I email you the schematic it will be a little easier to follow, because when I printed it out my old eyes could read it.

Sound good! Just click the email button in the signature.

 

[dan filipi]

Try uploading the schematic as an attachment again. I made an adjustment to the settings to display them larger so maybe it will be easier to read.