- Joined
- Aug 29, 2022
- Messages
- 171
- Reaction score
- 90
- Location
- Texas
- My Bike Models
- 1985 Kawasaki Concours
1975 Honda GL1000
I want to put fresh grease in the steering and swingarm bearings. On my last project the bike was stripped to a bare frame then the bearings were addressed, not looking forward to disassembling this GW in the usual manner (removing triple trees and swingarm). Any ideas? What about loosening the top nut enough to spray grease in there? I'm also looking to replace the fork oil but I've read putting the top nut back on requires a fabbed compressor or a 800 lb gorilla.