IMG 1995

"adecood":igtmozqj said:

So I was looking at at your pictures on how you heated the plenum for the single carb set up. When you taped into the water pump housing is there enough material on the housing to drill and tap a new hole? and do you know what size fitting that you used? and if I understand your set up correctly 1 line comes from the top of the water pump housing than goes to the new heat sink inder the carb. Than out the new heat sink on the opposite side of the carb plenum and another line goes from there to the "T' fitting at the Temp sensor. Which closes the loop for the coolant loop. Can you please let me know if I have that lay-out discription correct. And could you please let me know how you tapped into the water pump houshing and what size fitting you used.

Thanks for you help.
Dave D.
[/quote:igtmozqj]
It's a 1/4" hose barb. There was just enough meat to tap the fitting.
You have the flow set up right. That's how it works.

Click to expand...