GL1100 RUNNING RICH

[auctioneeral]

Ok put the EMPI 34 carb on it. Still have to do some fine tuning on carb. I have a little hesitation on it when riding under 2000rpm and go to rev it a little. So I got to adjust accelerator pump a little.

https://www.youtube.com/watch?v=QbGcwFxgrs4

[video]https://www.youtube.com/watch?v=QbGcwFxgrs4[/video]

 

[joedrum]

nice wow .... im liking it ...seems the pic kicking but :BigGrin:

 

[auctioneeral]

I'm getting there Joe.

 

[slabghost]

Sounding real good!

 

[auctioneeral]

I got another question about front brakes dragging. I rebuild front master cylinder and clear the return hole. But I did nothing to the calipers execpt new pads. Could I remove and clean calipers and piston without replacing the seals or is it wise to buy the rebuild kits.

 

[toytender01]

as long as you are there, why do half the job.

 

[joedrum]

well sometimes 1/2 a job is all one wants to try ...most likely cleaning return hole might do it ...i like to try things one at a time to tell what was it that fixed it

 

[auctioneeral]

Well I got my front calipers done today, no brake dragging now.
On a GL1100 does anybody know the type LED bulbs to use to replace the speedo,tach gauges and the bulbs for the cluster of lights for fuel,temp,oil and stuff.

 

[dkl]

Good Job,,,,hung in there like a yard Dawg.

 

[auctioneeral]

I even installed a new spring in my horn button.
Now to get back to tuning carb. This week sometime.